Mount'n Mover NZ

Your ideal system starts with the foundation (wheelchair, table, Floor Stand) and ends with the device you attach (iPad, speech device, tray). There are four easy steps to order what you need to get optimal use and enjoyment from our Mount’n Mover system.

"The Mount'n Mover has greatly increased my independence level each and every day. The mount brings my iPad to eye level and keeps it readily available for me to view or use as a communication device. While at work, I can move the arm with the nifty handle so I can roll into my work station. In addition, the Mount'n Mover provides me the opportunity for me to take pictures and videos on my own. Needless to say, this device is a wonderful tool to greater one's freedom and I give it my approval!"
Michael L. Sack

Overview

There are five options: Dual Arm, Single Arm, Tilt’n Turner, Simple Mount Small, and Simple Mount Large.
The Dual Arm, Single Arm and Tilt'n Turner offer:

Customizable lock-setters provide secure locks and repeatable user-specific positioning
Multiple lock positions may be set (24 per joint)
Built-in tilt plate adjusts from 0 to 110 degrees and anywhere in between
Handles provide easy-access, one-handed lock release and operation
Tool-free adjustments
Tilt hinges built-in resistance keeps devices and trays from slamming down
Attach to a wheelchair, table or floor stand

The Simple Mounts offer:

Two sizes of tray, small 3.5" x 7" x .250" and large 9" x 11.5" x .375"
Tray comes attached to either 8”, 12”, 18”, or 24” post. 36” post available at additional cost
Clear trays swivel 360 degrees, lay horizontal, tilt at a variety of angles (0-90 degrees) and folds down to the side
Attach to a wheelchair, table or floor stand
The tray is attached to a variable angle hinge. The hinge is available in either a high or low resistance
Uses current Mount’n Mover wheelchair hardware

Dual Arm

The Dual Arm offers the most flexible positioning, and has more reach than the Single Arm.
Consider the Dual Arm if you need greater flexibility to:

Use your device in more than one operating position
Set a different position for a second device
Position something “just so”
Move it around other things
Position it so the controls are either away from or towards the person

You need a longer arm, so you can:

Extend it more than 8” from the side of your chair
Extend across midline
Mount to the side opposite the joystick, and still position the device on that side
Use it for eye gaze
Extend it forward and inward

You have limited reach. Less range of motion is required to move it to another operating position.

The Hoop unlocks both the Elbow and Shoulder
Move the arm laterally, and
It will still be within reach

Single Arm

The Single Arm works well for people who don’t need the reach and flexibility of the Dual Arm.

Lower profile and more compact, which some people prefer
Simpler to operate, because you don’t need to learn to “steer” it
Positions the device lower than the Dual Arm
- unless just the upper arm of the Dual swings over your legs or tray

Limitations and considerations:

Fewer lock positions
Not as good for multiple operating positions
Hoop and paddle rotate away from you as you swing it away

Don’t have it lock away from you if you can’t reach the controls

Tilt'n Turner

The Tilt’n Turner is recommended for:

Smaller devices that are to be positioned on a post, just in front of the armrest
Placing a second device on the top of the post that a Dual or Single Arm is already attached to.
- enables someone to do two things concurrently (ie, read and use a laptop)
- Attachment to a table to position a tray or other device at a good operating height.

Double Decker

A Double Decker combines two Mount'n Movers for more accessibility and more options.

Multitask - access two things at once
Combine any two of your laptop, phone, camera, speech device, and tray
Adjust your environment, wherever you are

Simple Mount

Simple Mount Small (3.5" x 7" x .250") Simple Mount Large (9" x 11.5" x .375")
The Simple Mounts offer a simple, strong mount ideal for phones, remotes, iPads, tablets, cameras, eating, writing and reading.
Consider a Simple Mount for the following:

Abilty to fold the tray down to the side for storage
Add a second device to a Single or Dual arm by building a double-decker system
Position item close to the arm rest
Cost-effective
More robust than commercially available basic mounts

Easy Mover

Available with either Quick Connect Receiver (QCR) or Tilt Plate

Movable joints and tilt easily glide to desired position
Adjustable joint resistance
- Joints can be adjusted from low to high resistance, changing the effort required to move the mount
- Joints can be fully tightened to lock
Attachment options :
- New Quick Connect Receiver (QCR) is compatible with other mounts and devices
- Tilt Plate, compatible with Quick Release Plate (QRP)